The McLaren P1 is a limited production plug-in hybrid sports car by British automotive manufacturer McLaren Automotive. The concept car debuted at the 2012 Paris Motor Show. Deliveries to retail customers began in the UK in October 2013. The entire P1 production of 375 units was sold out by November 2013. It is considered to be the long-awaited successor to the McLaren F1, utilizing hybrid power and Formula 1 technology.

NOTE: The car is supplied with the standard Scalextric chassis with an SP motor mounted as a sidewinder. The car does NOT include the PCR chassis (underpan) number C8533 (shown) that must be purchased separately. The replacement C8533 chassis, however, does install with the same mounting screws as the stock chassis. This car is designed so that a new C8533 chassis (underpan) can be installed to allow the installation of a Slot.it motor pod with your choice of Slot.it motor, gearing, wheels and tires. The Slot.it motor pod and Slot.it parts are NOT INCLUDED but can also be purchased separately.

Scalextric Special Features:

• • Digital Plug Ready
  • Easy Change Pick-ups
  • High Detail GT
  • Magnatraction Working
  • Rear Lights Xenon
  • Effect Headlights

$54.99 $34.95
Save: 36% off

1/32 scale slot car, ready to run on all 1/32 scale non-digital tracks. Digital plug ready. Accepts C8515 plug-in digital chip. Super-resistant. World Exclusive Slot Racing Partnership

Special Features:

• • Digital Plug Ready
  • Easy Change Pick-ups
  • Magnatraction
  • Super-resistant

$54.99 $29.95
Save: 46% off

Keep reading – or if you would rather just cut to the chase and see all our new products,
click here to go to the shop

SICH109C HRS/2, Chassis, RTR, Inline 0.5mm Offset

$52.99

Slot It SICH31D HRS/2, Chassis, RTR, Sidewinder 0.5mm Offset

$52.99

NSR Ultimate Race Tire 19×10.5mm Trued NSR5270 Ultragrip rubber on NSR5010 wheels

$25.99

NSR Ultimate Race Tire 19×10.5mm Trued NSR5270 Supergrip rubber on NSR5010 wheels

$25.99

Sloting Plus “America R 16″ Duraluminium wheels – for 3/32″ (2.37mm) axles 15.9mm x 8.5mm – Ultra light 1.05g – M2.5 setscrews for larger hex size to prevent stripping of hex wrench – 0.050” Allen driver needed to install – 2 wheels per package with setscrews

$14.99

Sloting Plus “America R 17″ Duraluminium wheels – for 3/32″ (2.37mm) axles 16.9mm x 10mm – Ultra light 1.2g – M2.5 setscrews for larger hex size to prevent stripping of hex wrench – 0.050” Allen driver needed to install – 2 wheels per package with setscrews

$14.99

Sloting Plus BBS Pattern wheels for 3/32″ (2.37mm) axle – 15.9 diameter x 8.5mm rim width – aluminum / magnesium alloy – light weight 1.1g with setscrew – M2.5 setscrews for larger hex size to prevent stripping of hex wrench sometimes an issue with M2 size setscrews – Uses a 0.050″ Allen driver to install – 2 wheels / package with setscrews

$14.99

Sloting Plus BBS Pattern wheels for 3/32″ (2.37mm) axle – 16.9 diameter x 10mm rim width – aluminum / magnesium alloy – light weight 1.2g with setscrew – M2.5 setscrews for larger hex size to prevent stripping of hex wrench sometimes an issue with M2 size setscrews – Uses a 0.050″ Allen driver to install – 2 wheels / package with setscrews

$14.99

Sloting Plus Nylon M2 x 4mm Screws Phillips Drive Machine Screws – 0.025g each – 20 screws / package

$3.39

Sloting Plus Nylon M2 x 12mm Screws Phillips Drive Machine Screws – 0.025g each – 20 screws / package

$3.39

Sloting Plus 3D Printed Chassis for Spirit Peugeot 406 Silhouett – For use with Slot.it Motor pods – Approximate weight 10.5g – Includes Adjustable front axle ride height – This new chassis is much more flexible than the previous one and 10 times more resistant to breakage thanks to new ABS plastic that is used in the manufacture. Improved rear bushing mounting system also is incorporated.

$19.99

Sloting Plus 3D Printed Chassis for Ninco Ferrari 360 GTC – For use with Slot.it Motor pods – Approximate weight 10.4g – Includes Adjustable front axle ride height – This new chassis is much more flexible than the previous one and 10 times more resistant to breakage thanks to new ABS plastic that is used in the manufacture. Improved rear bushing mounting system also is incorporated..

$19.99

Sloting Plus 3D Printed Chassis for Ninco Ford GT – For use with Slot.it Motor pods – Approximate weight 10.6g – Includes Adjustable front axle ride height – This new chassis is much more flexible than the previous one and 10 times more resistant to breakage thanks to new ABS plastic that is used in the manufacture. Improved rear bushing mounting system also is incorporated.

$19.99

Sloting Plus 3D Printed Chassis for Ninco Mosler MT900 – For use with Slot.it Motor pods – Approximate weight 11.2g – Includes Adjustable front axle ride height – This new chassis is much more flexible than the previous one and 10 times more resistant to breakage thanks to new ABS plastic that is used in the manufacture. Improved rear bushing mounting system also is incorporated.

$19.99

Sloting Plus 3D Printed Chassis for Sloting Plus Reynard 2KQ – For use with Slot.it Motor pods – Approximate weight 11.4g – Includes Adjustable front axle ride height – This new chassis is much more flexible than the previous one and 10 times more resistant to breakage thanks to new ABS plastic that is used in the manufacture. Improved rear bushing mounting system also is incorporated.

$19.99

Sloting Plus 3D Printed Chassis for NSR Mosler MT900 – For use with Slot.it Motor pods – Approximate weight 11.4g – Includes Adjustable front axle ride height – This new chassis is much more flexible than the previous one and 10 times more resistant to breakage thanks to new ABS plastic that is used in the manufacture. Improved rear bushing mounting system also is incorporated

$19.99

Sloting Plus 3D Printed Chassis for Scalextric McLaren MP4-12C GT3 – For use with Slot.it Motor pods – Approximate weight 11.4g – Includes Adjustable front axle ride height – This new chassis is much more flexible than the previous one and 10 times more resistant to breakage thanks to new ABS plastic that is used in the manufacture. Improved rear bushing mounting system also is incorporated.

$19.99

Sloting Plus 3D Printed Chassis for Scalextric Audi R8 GT3 – For use with Slot.it Motor pods – Approximate weight 11.4g – Includes Adjustable front axle ride height – This new chassis is much more flexible than the previous one and 10 times more resistant to breakage thanks to new ABS plastic that is used in the manufacture. Improved rear bushing mounting system also is incorporated.

$19.99

Sloting Plus 3D Printed Chassis for Scalextric Audi R8 GT3 – For use with Slot.it Motor pods – Approximate weight 11.4g – Includes Adjustable front axle ride height – This new chassis is much more flexible than the previous one and 10 times more resistant to breakage thanks to new ABS plastic that is used in the manufacture. Improved rear bushing mounting system also is incorporated.

$19.99

Sloting Plus 3D Printed Chassis for Chassis Scalextric VW Polo WRC – Includes a Lexan cockpit insert & special mounting screws and a 3D printed “support plate” to hold the interior in place – For use with Slot.it Motor pods – Includes Adjustable front axle ride height – This new chassis is much more flexible than the previous one and 10 times more resistant to breakage thanks to new ABS plastic that is used in the manufacture. Improved rear bushing mounting system also is incorporated.

$26.99

Professor Motor Brass knurled inserts to fabricate Carrera Track Jumpers – Solder to end of wires to fabricate track jumpers – ULTRA PRECISE fit inside rails of Carrera Track for GREAT Electrical Connection – 8 pcs. per package

$4.99

www.electricdreams.com

Warehouse phone: (310) 676-7600

Slot car technical information and help email:

support@electricdreams.com

Our warehouse is open to walk-in customers Monday through Friday 9 am to 4 pm.

Next time you’re in the greater Los Angeles area stop by and see us.

606 Hawaii Street, Unit B

El Segundo, CA 90245

We’re just minutes from LAX.