1/32 scale slot car, ready to run on all 1/32 scale non-digital slot car tracks. This unique car was specially built to race at LeMans, and occupies a special niche in the race’s history. Model incorporates specially designed front-motor chassis and full-depth interior.

$229.99

Carrera 40031 Go!! Speed Course Digital 143

7.8 x 4.0-feet, 24.0-foot lap length
Wireless controllers
It’s the supreme duel in Formula 1 racing: Lewis Hamilton, the reigning Formula 1 world champion in his Mercedes-Benz F1 W06 Hybrid, vs Sebastian Vettel in the Ferrari SF 15-T. The Silver Arrow and the Scuderia Ferrari racer are both powered by a 1.6-litre, V6 turbocharged engine for a tough and tense battle around the 24.0-foot Carrera DIGITAL 143 circuit of the “Speed Course” set with a loop and tight bends. The long straight with the double lane change section is your last chance to snatch victory. Steady nerves and skilled hands on the WIRELESS controller are needed to ensure success.

$241.99 $179.95
Save 26% off

Want to see what’s new? Just keep reading…

Keep reading – or if you would rather just cut to the chase and see all our new products, click here to go to the shop.

Racer SW64 (Sideways) Ferrari 512BB/LM ‘Pioneer’ Le Mans 1983

$79.99

Sloting Plus SP140004 Universal Pinion Gear Press & Extractor – 1 Tool / Package – Stainless Steel – Light Weight 113 grams – approximate measurements 110 x 40 x 10mm – Includes a special DUO screw to correctly protect the motor and its shaft when a pinion is inserted. For 2mm shafts—for 1.5 mm use SP140020 Pinion Gear Press Actuator to install 1.5mm pinion shafts and SP140022 Pinion Gear Press Extractor Screw tor remove for 1.5mm pinions.

$59.99

Sloting Plus Universal Pinion Gear Press – 1 Tool / Package – Stainless Steel – Light Weight 105grams – Includes a special DUO screw to correctly protect the motor and its shaft when a pinion is inserted. For 2mm shafts—for 1.5 mm use SP140020 Pinion Gear Press Actuator for 1.5mm pinion shafts.

$42.99

Sloting Plus Universal “Toucan Beak” Pinion Gear Press – 1 Tool / Package – Stainless Steel – Light Weight 72 grams

This press is specially designed to REPOSITIONING, in a very precise way, any pinion in any double shaft motor and up to 48mm in length and until Ø2mm máximum diameter without need to disassemble wheels, motors or chassis.

$34.99

Sloting Plus Universal “UPSILON” Pinion Gear Press – 1 Tool / Package – Stainless Steel – Light Weight 92 grams. For 2mm shafts—for 1.5 mm use SP140020 Pinion Gear Press Actuator for 1.5mm pinion shafts s This press has been designed to put the pinion in almost all models with the position of the Anglewinder or Sidewinder and on the 1/43, 1/32, 1/28 and 1/24 scales. In many cases this tool may work with an assembled car.

$44.99

Sloting Plus Pinion Gear Press Actuator for 1.5mm Pinions – 1 Tool / Package – Stainless Steel – Light Weight 17 grams – For 1.5mm Pinions Spring Loaded Telescoping center pin – Use with 1.5mm Pinions and Tools SP140004, 140005 & 140007.

$14.99

Sloting Plus Universal “HYPER-LUBE” Bushings – Low friction leaded brass – for 3/32″ (2.38mm) axles – for chassis with 4.6 to 4.8mm holes between flanges – 2 bushings / package – Snaps into most brands of 1/32 scale chassis

The first bushing in the world created for Slot Racing with the ability to self-lubricate. Its design and posterior manufacture have been a great challenge, because its apparent simplicity hides the enormous difficulty of its manufacture. Thanks to its small conical tank and the tiny hole of 0.20mm in diameter the lubricant flows slowly to the axle lubricating it constantly. The idea of the inner groove has been conceived to achieve two objectives ; reducing the contact area with the axle by 50% and that the inside of the groove acts as a lubricant reservoir. It is ideal for all short races and medium duration races because the axle remains lubricated for much longer than a standard bushing. IMPORTANT TECH NOTE : Before the first use and after each cleaning it is necessary to lubricate as usual, as is usually done in a traditional bushing.

$5.99

Sloting Plus SP021113 Universal Wheels For 3/32″ Axle 15 X 8.5mm

$7.49

Sloting Plus SP138907 Universal Controller Cable Strain Relief

$5.99

Sloting Plus SP153212 – M2 x 12 flat head Phillips – 20/package

$2.79

Sloting Plus SP153304 M2 x 4mm size Stainless T6 Flat Head x 20

$2.99

New Cars Coming Soon

MMK KTL47-O Greenwood Corvette Le Mans 1980 (dnq) ‘Kentucky Legend’ Limited Production

Cast-resin body with cast and etched detail parts, hand-assembled, painted and decaled. Ready to race. Made in France.

$179.99

www.electricdreams.com

Warehouse phone: (310) 676-7600

Slot car technical information and help email:

support@electricdreams.com

Our warehouse is open to walk-in customers Monday through Friday 9 am to 4 pm.

Next time you’re in the greater Los Angeles area stop by and see us.

606 Hawaii Street, Unit B

El Segundo, CA 90245

We’re just minutes from LAX.