FEATURES:
CNC Machined Aluminum Base Plate – The base plate provides a sturdy mounting platform for all tire truer components and optional accessories. Rubber feet isolate vibration during sanding operations.
Glass Bead Laser Sintered Nylon – This material is used for the 3D printed components. This is a special nylon that was selected because it is very strong and lightweight.
Heavy duty High Torque DC Motor – Includes wires with banana plugs for easy connection to external power supply (not included).
Precision Pressure Adjustment – Large adjustment knob allows fine adjustment of tire pressure on sanding stick.
Over-sized Swing Arm - The sturdy swing arm design ensures there is no flex when the tires come in contact with the sanding stick.
ABEC-5 Sealed Ball Bearings - Over-sized precision ball bearings support the swing arm pivot points. The ball bearings provide ultra-smooth operation and long life.
Adjustable Bushing Mounting Arms – Bushing mounting arms can be adjusted to accommodate a wide range of rear axle assembly widths (distance between bushings). Arms can be positioned 18mm, 24.6mm, 31.2mm, 37.8mm or 44.4mm apart.
Compatible With Standard Axle Sizes – The Base Module supports rear axle assemblies wit0068 3/32” (2.38mm) OD axles. Optional Pro-Axle Kits will also be available to support cars using set screw wheels (3/32”, 1/8” and 3mm).
Two-sided Sanding Stick – The sanding stick is designed with a slight recess on the top and bottom surfaces. The allows sandpaper to be attached (glued) to both surfaces and prevents sandpaper on the bottom surface from being damaged as the sanding stick moves back and forth during sanding operations. The supplied sanding stick includes 220 and 400 grit sandpaper.
Pro-Pack Sanding Sticks (Optional) - Additional Pro-Pack Sanding Sticks will be available for purchase separately in 600/1000 and 1500/200 grit combinations.
Precision Captive Sanding Stick Holder – The captive design ensures the sanding stick stays perfectly flat and does not lift during sanding operation (manual or with optional Reciprocator module)
BASE COLOR MAY VARY
CONTENTS:
Fully Assembled Tire Truer
Dual-Sided Sanding Stick - 220 and 400 grit
1/32 Axle Pulley Adapter
2mm Grub Screw
Wrench
Note: To power the Base Module, you will need an external variable DC power supply (not included). The minimum recommended specs are 0-12VDC with a minimum rated output of 5A. Digital readouts for voltage and current are recommended.
OPERATING INSTRUCTIONS:
- Place the unit on a flat work surface.
- Place the axle pulley on the axle assembly (near the middle) and gently tighten the set screw until the pulley doesn't spin in the axle.
- Test fit the car's axle assembly to the machine so that the drive belt sits securely on the axle pulley in the center of the machine. Adjust axle tabs to bushings/bearings are seated on tabs and the axle assembly cannot shift side to side.
- Plug the power leads into a suitable power supply.
- Set the supply voltage to 0 and turn on the power supply.
