Scalextric C1319TGT40 Continental Sports Cars set PLUS two Ford GT40 cars

Scalextric C1319TGT40 Continental Sports Cars set PLUS two Ford GT40 cars. This set includes the Scalextric “Super Resistant” LMP and ProGT cars PLUS two fully detailed Scalextric Ford GT40 high-performance cars. You receive four 1/32 scale race cars (only two cars can race at a time.):

• LMP GT car with separate self-adhesive numbers and markings
• ProGT car with separate self-adhesive numbers and markings
• Scalextric C2917 Ford GT40 Mk II, LeMans 1966
• Scalextric C3231 Ford GT40 Mk.II, Daytona 1966

$199.99

Grand National vs. NASCAR Challenge two-car set at a bargain price EDSET-33 NASCAR Chevy COT & Dodge Charger 2-car pack—$87.90 value

Scalextric C2958 NASCAR Chevrolet Impala SS COT, Dale Earnhardt Jr. 2008

Scalextric C3323 Dodge Charger, Bobby Allison (sort of…)

NASCAR vs. Grand National Challenge. Two cars, two top drivers, from two eras—which will win? Both have similar sidewinder motors, gear ratios and weight so their performance should be very close.

This 2-car pack includes a Scalextric C2958 NASCAR Chevrolet Impala SS COT and a Scalextric C3323 Dodge Charger from the Grand National era, at a super-low price. Buy them for racing or repainting — at our price you can afford to cut them up, modify them, and race the daylights out of them!

Both cars are new and in their original packaging.

NOTE:  The Scalextric C3323 Dodge Charger is Scalextric’s Dodge Charger road car in racing livery as was done with the #90 Ford Torino.  This is NOT an exact model of the racing version of the Dodge Charger race car as it comes.  We think it can be modified into one but it would take a considerable degree of skill and effort to do it without messing up the paint job.

Features:

High detail – Interior detail. Small parts decoration. Etched metal parts.

Magnatraction – Adjustable downforce positions

$59.95

Scalextric C3521 Lotus Exige R-GT

1/32 scale slot car, ready to run on all 1/32 scale non-digital tracks. Digital plug ready. Accepts C8515 plug-in digital chip. Super-resistant.

Race – Round 7, European Rally Championship, Madeira, Portugal, 2012

Drivers – Bernardo Sousa and Corrado Mancini

Special Features:

• Digital Plug Ready
• Easy Change Pick-ups
• Magnatraction
• Super Resistant

$44.99

Scalextric C3490 Lancia Delta S4, 1986

1/32 scale slot car, ready to run on all 1/32 scale non-digital slot car tracks.

Race – 1986 Rally San Remo

Driver – Fabrizio Tabaton

Special Features:

• Digital Plug Ready
• Easy Change Pick-ups
• Magnatraction
• Working Headlights
• Working Rear Lights
• Xenon Effect Headlights
• High Detail

$54.99

Scalextric C3534 1970 Camaro, Frank Gardner

1/32 scale slot car. Ready to run on all 1/32 scale non-digital slot car tracks. Digital plug ready. Accepts C8515 plug-in digital chip. Ready to run on all 1/32 and 1/24 scale non-digital tracks. Model of car driven by Frank Gardner in the 1972 British Saloon Car Championship. With working lights.

Motor: FC130 endbell drive.

Race – 1972 British Saloon Car Championship Season, Brands Hatch

Driver – Frank Gardner

Special Features:

• Digital Plug Ready
• Easy Change Pick-ups
• Magnatraction
• Working Headlights
• Working Rear Lights
• Xenon Effect Headlights
• High Detail

$54.99

Scalextric C3514 Bentley Continental GT3

1/32 scale slot car, ready to run on all 1/32 scale non-digital tracks. Digital plug ready. Accepts C8515 plug-in digital chip.

World Exclusive Slot Racing Partnership

Special Features:

• Digital Plug Ready
• Easy Change Pick-ups
• Magnatraction
• Working Headlights
• Working Rear Lights
• Xenon Effect Headlights
• High Detail

$54.99

Scalextric C3516 Audi R8, FIA GT, 2013

1/32 scale slot car, ready to run on all 1/32 scale non-digital slot car tracks. Digital plug ready. Accepts C8515 plug-in digital chip.

Race – FIA GT Series 2013, Circuit Terlaemen, Heusden-Zolder, Belgium

Driver – Anthony Kumpen

Special Features:

• Digital Plug Ready
• Easy Change Pick-ups
• Magnatraction
• Working Headlights
• Working Rear Lights
• Xenon Effect Headlights
• High Detail

$54.99

Scalextric C3517 Camaro GT-R, #23

1/32 scale slot car. Ready to run on all 1/32 scale non-digital slot car tracks. Digital plug ready. Accepts C8515 plug-in digital chip.

Race – Danish Thundersport Championship

Driver – Jan Magnussen

Special Features:

• Digital Plug Ready
• Easy Change Pick-ups
• Magnatraction
• Working Headlights
• Working Rear Lights
• Xenon Effect Headlights
• High Detail

$54.99

Scalextric C3494 MG Metro 6R4 Rallycross

1/32 scale slot car, ready to run on all 1/32 scale non-digital slot car tracks.

Race – British Rallycross Championship, Lydden Hill

Driver – Lawrence Gibson

Special Features:

Digital Plug Ready

Easy Change Pick-ups

Magnatraction

High Detail

Digital Plug Ready (DPR) – convert for use with the Scalextric Digital range in under sixty seconds using the C8515 Digital Plug.

$54.99

Scalextric C3536 Mercury Cougar #14, TransAm Series

1/32 scale slot car. Digital plug ready. Accepts C8515 plug-in digital chip. Model of car driven by Dave Tatum and bill Pendleton in the TransAm Series.

Special Features:

Digital Plug Ready

Easy Change Pick-ups

Magnatraction

Working Headlights

Working Rear Lights

High Detail

Configuration

Motor: Mabuchi SP, 18k rpm, Gear ratio 11:36

Chassis: Rear Mounted Motor, Side-winder, Rear 2 wheel drive

Magnet: Rectangular stepped 1.5 mm, Down-force 200 gm

Length: 150 mm

Wheelbase: 89 mm

Width Axle/Hub: 55 mm Front, 56 mm Rear

Tire diameter: 19(ext), 13(int), 8 mm Front, 19(ext), 13(int), 8 mm Rear

Weight:86 gm

$54.99

Fly 01804 Flykit Lister Storm 2-car/4 body KIT—PRE-ORDER NOW!

Fly 01804 Flyslot Flykit Lister Storm 2-car/4 body KIT

Unassembled kit with TWO complete chassis and FOUR bodies:

• Gulf
• Jagermeister
• Moviestar
• Vodafone

NOTE: all four bodies are painted but there are only detail parts for two. You will also need to order two of the 01804 Detail Parts sets if you want four complete bodies.

$69.99

BRM 032 ‘WEST FM’ McLaren F1 GTR #49—PRE-ORDER NOW!

BRM032 ‘WEST FM’ McLaren F1 GTR #49.

West Competition entered this car in the 1995 Le Mans 24 Hour race for drivers John Nielsen, Jochen Mass and Thomas Bscher.

Limited production of just 500 units.

1/24 scale slot car. Ready to run on all 1/24 scale slot car tracks.

The new “Racing” chassis has an articulated ball joint at the front of the motor pod with spring suspension at the rear corners. The front axle rides in brass bearings and is adjustable for up or down travel to tailor the “ride height”. CNC machined black anodized aluminum chassis plate, anodized to stop the chassis shorting across the track braids/rails. High density plastic anglewinder motorpod. Eccentric rear axle bushings allow the rear axle to be set high or low.

$189.99

BRM 033 ‘Harrods’ McLaren F1 GTR #51—PRE-ORDER NOW!

BRM 033 ‘Harrods’ McLaren F1 GTR #51

Andy Wallace, Derek Bell and Justin Bell drove the Team Mach One Racing entry to a third place finish in the 1995 Le Mans 24 Hour race.

Limited production of just 500 units.

1/24 scale slot car. Ready to run on all 1/24 scale slot car tracks. The new “Racing” chassis has an articulated ball joint at the front of the motor pod with spring suspension at the rear corners. The front axle rides in brass bearings and is adjustable for up or down travel to tailor the “ride height”. CNC machined black anodized aluminum chassis plate, anodized to stop the chassis shorting across the track braids/rails. High density plastic anglewinder motor pod. Eccentric rear axle bushings allow the rear axle to be set high or low.

$189.99

BRM 034 ‘Harrods’ McLaren F1 GTR—PRE-ORDER NOW!

BRM 034 ‘Harrods’ McLaren F1 GTR

Andy Wallace and Olivier Grouillard drove the Harrods Mach One Racing entry to victory in the 1996 Silverstone round of the BPR Global Endurance GT Championship.

Limited production of just 200 units.

1/24 scale slot car. Ready to run on all 1/24 scale slot car tracks. The new “Racing” chassis has an articulated ball joint at the front of the motor pod with spring suspension at the rear corners. The front axle rides in brass bearings and is adjustable for up or down travel to tailor the “ride height”. CNC machined black anodized aluminum chassis plate, anodized to stop the chassis shorting across the track braids/rails. High density plastic anglewinder motor pod. Eccentric rear axle bushings allow the rear axle to be set high or low.

$189.99

BRM 035 ‘West’ McLaren F1 GTR—PRE-ORDER NOW!

BRM 035 ‘West’ McLaren F1 GTR.

This one was not a proper racecar but was used for demonstrations by Team McLaren.

Limited production of just 500 units.

1/24 scale slot car. Ready to run on all 1/24 scale slot car tracks. The new “Racing” chassis has an articulated ball joint at the front of the motor pod with spring suspension at the rear corners. The front axle rides in brass bearings and is adjustable for up or down travel to tailor the “ride height”. CNC machined black anodized aluminum chassis plate, anodized to stop the chassis shorting across the track braids/rails. High density plastic anglewinder motor pod. Eccentric rear axle bushings allow the rear axle to be set high or low.

$189.99

BRM 036 McLaren F1 GTR White Racing KIT 1/24 scale—PRE-ORDER NOW!

BRM 036 McLaren F1 GTR White Racing KIT

This is an unassembled kit with an unpainted body and driver figure.Chassis is not assembled–photos show assembled chassis.

1/24 scale slot car.

The new “Racing” chassis has an articulated ball joint at the front of the motor pod with spring suspension at the rear corners. The front axle rides in brass bearings and is adjustable for up or down travel to tailor the “ride height”. CNC machined black anodized aluminum chassis plate, anodized to stop the chassis shorting across the track braids/rails. High density plastic anglewinder motor pod. Eccentric rear axle bushings allow the rear axle to be set high or low.

$159.99

NSR 1181AW Corvette C6R Luc Alphand Aventures #72—PRE-ORDER NOW!

Corvette C6R Luc Alphand Aventures #72

NSR 1/32 Analog RTR Chevrolet Corvette C6R Luc Alphand Aventures LeMans Series ’09 #72 SPA-FRANCORCHAMPS Winners – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Ultra smooth and quiet all metal gearing – Setscrew Aluminum wheels all around with “air system” at the rear – ANGLEWINDER Balanced Shark Motor 25,000 RPM & 176 g-cm Torque – Adjustable suspension motor pod – Heat treated axles with self lubricating bushings – Clear coat finish over paint and Tampo printing for maximum durability & high gloss

$97.99

NSR 1184AW EVO 5 Mosler MT900R ANGLEWINDER Team Castrol Racing #14—PRE-ORDER NOW!

EVO 5 Mosler MT900R ANGLEWINDER chassis Team Castrol Racing #14.

NSR 1/32 Analog RTR EVO 5 Mosler MT900R Team Castrol Racing #14 – EVO 5 TRIANGULAR Motor Pod – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around with “air system” at the rear – Anglewinder Balanced King Motor 21,400 RPM & 350 g-cm Torque – Ultra smooth & quiet all metal gearing – Adjustable suspension motor pod – Heat treated axles with self lubricating bushings – Neodymium traction magnet – Clear coat finish over paint and Tampo printing for maximum durability & high gloss

NOTE: There are three versions of the new NSR Mosler with either an anglewinder, an inline or a sidewinder motor pod and motor in the chassis, each with the same body and deco.

$97.99

NSR 1184IL EVO 5 Mosler MT900R INLINE Team Castrol Racing #14 —PRE-ORDER NOW!

INLINE chassis EVO 5 Mosler MT900R Team Castrol Racing #14.

NSR 1/32 Analog RTR EVO 5 Mosler MT900R Team Castrol Racing #14 – EVO 5 TRIANGULAR Motor Pod – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around with “air system” at the rear – INLINE Balanced King Motor 21,400 RPM & 350 g-cm Torque – Ultra smooth & quiet all metal gearing – Adjustable suspension motor pod – Heat treated axles with self lubricating bushings – Neodymium traction magnet – Clear coat finish over paint and Tampo printing for maximum durability & high gloss

NOTE: There are three versions of the new NSR Mosler with either an anglewinder, an inline or a sidewinder motor pod and motor in the chassis, each with the same body and deco.

$97.99

NSR 1184SW EVO 5 Mosler MT900R SIDEWINDER Team Castrol Racing #14—PRE-ORDER NOW!

EVO 5 Mosler MT900R SIDEWINDER chassis Team Castrol Racing #14.

NSR 1/32 Analog RTR EVO 5 Mosler MT900R Team Castrol Racing #14 – EVO 5 TRIANGULAR Motor Pod – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around with “air system” at the rear – SIDEWINDER Balanced SHARK Motor 25,000 RPM & 176 g-cm Torque – Ultra smooth & quiet all metal gearing – Adjustable suspension motor pod – Heat treated axles with self lubricating bushings – Neodymium traction magnet – Clear coat finish over paint and Tampo printing for maximum durability & high gloss

NOTE: There are three versions of the new NSR Mosler with either an anglewinder, an inline or a sidewinder motor pod and motor in the chassis, each with the same body and deco.

$97.99